Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2009 >> Impreza WRX F4-2.5L DOHC Turbo >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair

Knock Sensor

REMOVAL
1. Disconnect the ground cable from battery.






2. Remove the intercooler.
3. Disconnect the knock sensor connector.






4. Remove the knock sensor from cylinder block.






INSTALLATION
1. Install the knock sensor to the cylinder block.

NOTE: The portion of the knock sensor cord that is pulled out must be positioned at a 60° angle relative to the engine rear.






2. Connect the knock sensor connector.






3. Install the intercooler.
4. Connect the ground cable to battery.




pro multis · About Operation CHARM