A/T Oil Temp Warning Light Display
AT OIL TEMP Warning Light DisplayOPERATION
When any on-board diagnostics item is malfunctioning, the ATF temperature warning light blinks. The light keeps blinking from when the malfunction is detected after starting the engine, until the ignition switch is turned OFF. The faulty parts or unit can be identified by reading DTCs. Problems which occurred previously can also be identified through the memory function. If the ATF temperature warning light does not blink when a problem actually occurs, the problem can be determined by checking the performance characteristics of each sensor using the Subaru Select Monitor. Warning light signal patterns are shown in the figure.
Inspect the ATF temperature warning light when it does not operate correctly.
INSPECTION
DIAGNOSIS:
The ATF temperature warning light circuit is open or shorted.
TROUBLE SYMPTOM:
When the ignition switch is turned to ON, the ATF temperature warning light does not illuminate.
WIRING DIAGRAM:
WIRING DIAGRAM:
Step 1-Step 8:
