Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Horn: Service and Repair
HornREMOVAL
1. Disconnect the ground cable from battery.
2. Remove the three clips and peel the right side lower mud guard upward.
3. Remove the horn bracket mounting bolt (A).
4. Disconnect the harness connector and remove the horn assembly (B).
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 18 N.m (1.8 kgf.m, 13.3 ft.lb)