Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Control Module: Service and Repair
REMOVAL1. Disconnect the ground cable from battery.
2. Remove the instrument panel lower cover and disconnect the connector.
3. Disconnect the connector from TCM.
4. Remove the TCM.
INSTALLATION
1. Install the TCM.
Tightening torque: 7.5 N-m (0.8 kgf-m, 5.5 ft-lb)
2. Connect the connector to the TCM.
3. Install in the reverse order of removal.
4. Execute the learning control promotion.