Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Rear Vehicle Speed Sensor
REMOVAL1. Set the vehicle on a lift.
2. Disconnect the ground cable from battery.
3. Lift up the vehicle.
4. Disconnect the connector from the rear vehicle speed sensor.
5. Remove the rear vehicle speed sensor.
INSTALLATION
Install in the reverse order of removal.
NOTE: Replace the O-ring with a new part.
Tightening torque: 7 N-m (0.7 kgf-m, 5.2 ft-lb)