Front Door Window Glass: Service and Repair

FRONT DOOR GLASS

Front Door Glass:

REMOVAL
1. Remove the front door trim.
2. Remove the sealing cover.
3. Remove the outer mirror assembly.
4. Remove clip (A), and remove the front end of the weather strip.







5. Remove the gusset.







6. Remove the stabilizers.







7. Remove clips (A), and remove the rear end of the weather strip.







8. Remove screw (A) from the rear end of the weather strip outer, to remove the weather strip outer.







9. Connect the ground cable to battery and power window switch connector.
10. Operate the power window switch to move the glass to the position shown in the figure, then remove the two nuts through the service holes.







11. Remove the door glass.

CAUTION:
- Since the gear may be disengaged, do not turn regulator in the closing direction after removing glass.
- Avoid impact and damage to the glass.







INSTALLATION

1. Install in the reverse order of removal.

CAUTION: Make sure that the glass stay is placed securely in sash.

2. Adjust the front door glass.

Tightening torque: Refer to "COMPONENT" of "General Description". [Ref. to FRONT DOOR GLASS, COMPONENT, General Description.]