Antitheft Motion Sensor: Service and Repair

Impact Sensor

REMOVAL

1. Remove the key from ignition switch.
2. Close all the doors, trunk lid and rear gate.
3. Press the UNLOCK button of the keyless transmitter.
4. Change the setting of impact sensor using Subaru Select Monitor.
5. Disconnect the ground cable from the battery.
6. Remove the impact sensor.

INSTALLATION

1. Remove the key from ignition switch.
2. Close all the doors, trunk lid and rear gate.
3. Press the UNLOCK button of the keyless transmitter.
4. Disconnect the ground cable from the battery.
5. Install the impact sensor.
6. Connect the ground cable to the battery.
7. Change the setting of impact sensor using Subaru Select Monitor.