Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2009 >> Legacy F6-3.0L DOHC >> Repair and Diagnosis >> Powertrain Management >> PROM - Programmable Read Only Memory >> Technical Service Bulletins >> All Technical Service Bulletins >> A/T Controls - A/T Oil Lamp Flashes/Multiple DTCs Set
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

A/T Controls - A/T Oil Lamp Flashes/Multiple DTCs Set

NUMBER: 11-93-09R
DATE: 10/28/09

APPLICABILITY:
2008~09MY Legacy/Outback 2.5L Turbo, 5AT
2008~09MY Legacy/Outback 3.0L N/A, 5AT
2008~10MY Tribeca 3.6L N/A, 5AT

SUBJECT:
TCM Reprogramming Files

INTRODUCTION

If you encounter a vehicle with the AT Oil light flashing with one or more of the following codes stored in memory (P0751, P0756, P0761, P0766, P0771, P1840, P1841, P1842, P1843, P1844) there are now reprogramming files to remedy the condition. Note: P0700 will also be stored in ECM memory. The PACK file is to improve the oil pressure switch judgment criteria. If afier reprogramming the vehicle still has the symptom, refer to the applicable service manual for diagnostics.

Note:
TCM reprogramming files were sent to all SDS users in the October 2009 SSMIII update version 1.20.37.4.





PACK FILE APPLICABILITY





Disclaimer
pro multis · About Operation CHARM