Inspection

INSPECTION

Before performing diagnostics, check the following item which might affect body integrated unit malfunctions.

1. Measure the battery voltage and check electrolyte.

Standard voltage: 12 V or more

Specific gravity: Above 1.260

2. Check the fuse condition.
Make sure that ampere of the fuse is setting value, and it is not blown out. While doing this, also check the backup fuse condition.
3. Check the connecting condition of harness and harness connector.
4. Confirm that a setting that does not match the vehicle equipment, is not set in the body integrated unit. Subaru Select Monitor
5. Make sure that the function setting (ECM customizing) of the body integrated unit matches the vehicle equipment. Subaru Select Monitor
6. Confirm "Factory or Market setting" of body integrated unit registrations is "Market".
7. Confirm key illumination does not blink with ignition switch turned to ON.