Procedures

Differential Gear Oil
INSPECTION
1. Remove the filler plug, and then check the gear oil. Replace the gear oil if it is contaminated or deteriorated.
2. Check that the gear oil level is within -5 mm (-0.2 in) from the bottom of the filler plug hole. If the level is low, confirm that there is no oil leakage and refill up to the bottom of filler plug.

NOTE: On VA1 -types at factory settings, the oil level may be within -14 mm (-0.6 in) from the bottom of the filler plug. This is at normal level, requiring no oil refill.

- T-type





- VA1-type





- VA2-type