Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2009 >> Outback F6-3.0L DOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - A/T >> Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module: Service and Repair

REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the lower cover and then disconnect the connector.
3. Disconnect the connector from TCM.





4. Remove the TCM.

INSTALLATION
1. Install the TCM.
Tightening torque: 7.5 N-m (0.8 kgf-m, 5.5 ft-lb)





2. Connect the connector to the TCM.
3. Install in the reverse order of removal.
4. Perform Clear Memory 2 operation.
5. Execute the learning control promotion.
6. Perform the inspection at the end of repair work, and make sure there is no faulty as below;
- Excessive shift shock
- Oil leakage from the transmission body, etc.
- Occurrence of noise caused by interference etc.
pro multis · About Operation CHARM