Read Current Data

READ CURRENT DATA

1) On the [[Main Menu]] display screen, select the (Each System Check).
2) On the [[System Selection Menu]], select (Transmission Control System).
3) After transmission type information pops up, select [OK].
4) On the [[Transmission Diagnosis]] screen, select (Current Data Display & Save).
5) Select (Normal sampling) on the [[Current Data Display & Save]] screen.
6) Using the scroll key, scroll the display screen up or down until the desired data is shown.

^ A list of the support data is shown in the following table.





NOTE:
For details concerning the operation procedure, refer to the "PC application help for Subaru Select Monitor".