Installation

INSTALLATION

1) Install the rear vehicle speed sensor.

Tightening torque:
7 N-m (0.7 kgf-m, 5.2 ft-lb)





2) Connect the rear vehicle speed sensor connector.





3) Install the transmission rear crossmember bolt.

Tightening torque:
75 N-m (7.6 kgf-m, 55.3 ft-lb)

4) Install the propeller shaft.
5) Install the heat shield cover.





6) Install the rear exhaust pipe and muffler.
7) Lower the vehicle.
8) Pour ATF from the oil charge pipe.
9) Check the level and leaks of ATF.