Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature SensorREMOVAL
1. Disconnect the ground cable from battery.
2. Remove the generator.
3. Drain engine coolant.
4. Disconnect the connector (A) from the engine coolant temperature sensor, and remove the engine coolant temperature sensor.
INSTALLATION
Install in the reverse order of removal.
NOTE: Use a new gasket.
Tightening torque: 18 N.m (1.8 kgf-m, 13.3 ft-lb)