Rear Washer

Rear Washer

INSPECTION

1. VISUAL CHECK
Check the following items, if a failure is found replace the parts.
- Make sure the nozzle and hose are not clogged.
- Make sure the hose is not bent.

2. SPRAY POSITION CHECK
1. Turn the wiper switch to OFF position.
2. While the vehicle is at a standstill, make sure that the washer injection position is as shown in the figure.
3. After check, if the spray position is largely different from the position, replace with a new washer nozzle.

Spray position:
A: 140 mm (5.5 in)
B: 70°