Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Turn Signal Light and Hazard Light System
Turn Signal Light and Hazard Light SystemINSPECTION
1. CHECK TURN SIGNAL SWITCH
Measure the resistance between turn signal switch terminals. Testing and Inspection
2. CHECK HAZARD SWITCH
1. Remove the A/C control panel.
- Manual A/C model:
- Auto A/C model:
2. Measure the resistance between hazard switch terminals.
Preparation tool: Circuit tester
- AUTO A/C MODEL
- MANUAL A/C MODEL
3. Replace the A/C control panel if the inspection result is not within the standard value.
3. CHECK TURN SIGNAL AND HAZARD MODULE
1. Measure the voltage between turn signal & hazard module connector and chassis ground.
Preparation tool: Circuit tester
Connector
2. Replace the turn signal and hazard module if the inspection result is not within the standard value.