Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Inspection
Rear Hub Unit BearingINSPECTION
1) Moving the rear tire up and down by hand, check there is no backlash in bearing, and check the wheel rotates smoothly.
CAUTION:
If there is any fault in the bearing, replace hub unit bearing.
2) Inspect the lean of axis direction using a dial gauge. Replace the bearing if the load range exceeds the limitation.
Service limit:
Maximum: 0.05 mm (0.0020 in)
