Fog/Driving Lamp: Service and Repair

Front Fog Light Assembly

REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the clips and turn over the front end of front mud guard.

3. From the bottom of bumper face, remove the front fog light assembly.
1. Disconnect the connector.
2. Remove the bolts, and remove the front fog light assembly.

INSTALLATION
1. Install each part in the reverse order of removal.

Tightening torque:
Front fog light assembly: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

2. Adjust the fog light beam.