Installation

Transmission Mounting System

INSTALLATION

TRANSMISSION REAR CROSSMEMBER & REAR CUSHION RUBBER

1) Install the rear cushion rubber.

Tightening torque:
40 Nm (4.1 kgf-m, 29.5 ft-lb)

2) Install the crossmember.

Tightening torque:
T1: 35 Nm (3.6 kgf-m, 25.8 ft-lb)
T2: 75 Nm (7.6 kgf-m, 55.3 ft-lb)





3) Remove the transmission jack.
4) Install the heat shield cover.
5) Install the front exhaust pipe.
6) Install the under cover.
7) Lower the vehicle.
8) Connect the battery ground terminal.