With Manufacturer's Scan Tool

DTC CHECK (USING SCAN TOOL, TECH-1)





1. After setting cartridge for ABS to Tech-1, connect Tech-1 to data link connector.
Special Tool
(A): 09931-76011 (Tech-1, SUZUKI scan tool)
(B): Mass storage cartridge
(C): 16/14 pin DLC cable
2. Turn ignition switch ON.
3. Read DTC according to instructions displayed on Tech-1 and print it or write it down. Refer to Tech-1 operator's manual for further details.
4. After completing the check, turn ignition switch off and disconnect Tech-1 from DLC.