Ignition Coil: Service and Repair

IGNITION COIL ASSEMBLY (IGNITER AND IGNITION COIL)




REMOVAL
1. Disconnect ignition coil coupler.
2. Remove ignition coil bolt, and then pull out ignition coil(s).

IGNITION COIL ASSEMBLY (IGNITER AND IGNITION COIL)

INSPECTION
Check ignition coil assembly for the following:
- Damage
- Deterioration
- Terminal for corrosion




INSTALLATION
1. Install ignition coil(s) securely.
2. Tighten ignition coil bolt(s), and then connect ignition coil coupler(s).

Tightening Torque (a): 3 N.m (0.3 kg-m, 2.5 lb-ft)