Rear Door Window Regulator: Service and Repair

Rear Door Window Regulator Removal And Installation

Rear Door Glass Components:

Removal

1. Remove door glass.
2. Remove door window regulator attaching screws (1) (six pcs.). Then, take out regulator through hole (A).







Installation

Reverse removal sequence to install door window regulator noting the following points.
1. Apply multi-purpose grease to sliding parts.







2. Adjust door window regulator according to the following procedure.
a. Loosen seven screws as shown.
b. Raise door glass fully with regulator handle.
c. Tighten five screws (1).
d. Lower door glass.
e. Tighten two screws (2).