Air Bag Control Module: Testing and Inspection
Sensing And Diagnostic Module (SDM):
CAUTION:
- Do not connect a tester whatever type it may be.
- Never repair or disassemble SDM.
- If SDM was dropped from a height of 91.4 cm (3 ft) or more, it should be replaced.
Sensing And Diagnostic Module (SDM):
- Check SDM and SDM bracket for dents, cracks or deformation.
- Check SDM connector for damage cracks or lock mechanism.
- Check SDM terminal for bend, corrosion or rust.
If any faulty condition is found in above checks, replace.