Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature (ECT) Sensor Removal and InstallationRemoval
1. Disconnect negative cable from battery.
2. Drain coolant.
3. Disconnect connector from ECT sensor (1).
4. Remove ECT sensor from water outlet cap.
Installation
Reference: Engine Coolant Temperature (ECT) Sensor Inspection
Reverse removal procedure noting the following.
- Clean mating surfaces of sensor and water outlet cap.
- Tighten ECT sensor (1) to specified torque.
Tightening torque
ECT sensor a: 13 N.m (1.3 kg-m, 9.5 lb-ft)
- Connect connector to sensor securely.
- Refill cooling system.