Power Seat Motor Position Sensor: Testing and Inspection

Seat Position Sensor And Its Circuit Inspection

Reference: Seat Position Sensor Removal and Installation:Advanced Air Bag

Seat Position Sensor and Its Circuit Check
1. Connect SUZUKI scan tool to DLC with ignition switch OFF.
2. Turn ignition switch to ON position, select Data LIST mode on SUZUKI scan tool.
3. Check that displayed driver's seat position statement is correctly when sliding it referring to Scan tool Data: Advanced Air Bag.

If displayed driver's seat position statement is correct, seat position sensor and its circuit are in good condition.
If not, check wire harness and connections.
If wire and connection are OK, replace seat position sensor.

Visual Check
^ Check sensor and its bracket for dents, cracks, deformation or rust.
^ Check sensor connector (sensor side and harness side) and sensor connector lock mechanism for damage or crack.
^ Check connector terminals for bend, corrosion or rust.

If defect found, replace seat position sensor.