Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2009 >> SX4 4WD L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Accelerator Pedal Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Service and Repair

Accelerator Pedal Position (APP) Sensor Assembly Removal and Installation

CAUTION:
^ Do not expose APP sensor assembly to excessive shock like a dropping it. If APP sensor assembly has been exposed to excessive shock, it should be replaced.
^ Be careful not to expose sensor section of APP sensor assembly to water.

NOTE: After replacing APP sensor assembly, perform calibration of throttle valve referring to Electric Throttle Body System Calibration.

Removal

1. Disconnect negative cable at battery.
2. Disconnect connector from APP sensor assembly.
3. Remove APP sensor assembly from its bracket.

Installation

Reverse removal procedure for installation noting the following.
^ Tighten APP sensor assembly upper nut (1) first and then lower nuts (2) to specified torque.





Tightening torque
APP sensor assembly nut a: 6 Nm (0.6 kg.m, 4.5 ft. lbs.)

^ Connect connector to APP sensor assembly securely.
pro multis · About Operation CHARM