Advanced Air Bag
DTC B1032: Driver Air Bag (1st Stage) Circuit Resistance LowWiring Diagram
Wiring Diagram:
DTC Will be Set when
The combined resistance of the driver air bag (inflator) module (1st stage), contact coil assembly, harness wiring and connector terminal contact is below a specified value for specified time.
Flow Test Description
STEP 2: Check whether malfunction is in contact coil and driver air bag (inflator) module (1st stage) or the others.
STEP 3: Check driver air bag (inflator) module (1st stage) initiator circuit.
STEP 4: Check whether malfunction is in contact coil or driver air bag (inflator) module (1st stage).
DTC Troubleshooting
Step 1-2:
Step 3:
Step 4:
NOTE:
Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Clear DTCs, if any.
- Repeat Air Bag Diagnostic System Check:Advanced Air Bag to confirm that the trouble has been corrected. Air Bag Diagnostic System Check