Rear Suspension

Rear Wheel Alignment Inspection
Measure toe and camber.

NOTE:
Rear suspension is not adjustable structure.

Rear toe (Total)
: IN 5.0 ± 5.0 mm (IN 0.1968 ± 0.1968 in.)

Rear camber
: -1° ± 1°

If measured value is out of specified value, check following items for damage, deformation and crack.
^ Rear axle
^ Wheel hub or wheel bearing
^ Vehicle body

Reference information

Toe angle
When checked rear toe angle with total wheel alignment tester or the like, refer to the following specification.

Rear toe angle (Each wheel)
: IN 17' ± 17'