Power Steering Fluid: Service and Repair
P/S Fluid ChangeCAUTION:
Do not use any fluid other than the specified P/S fluid. Use of any fluid other than the specified P/S fluid may cause juddering or some other faulty condition to occur.
1) Lift up vehicle.
2) Remove front under cover.
3) When engine is cool, remove P/S gear low pressure hose (1) from pipe and drain P/S fluid from low pressure hose.
4) Install low pressure hose to pipe.
5) Fill specified P/S fluid and bleed air.
6) Repeat Step 3) to 5) for 2 or 3 times if necessary.
P/S fluid specification
: Equivalent to ATF DEXRON(R)-II (ESSO JWS2326) or ATF DEXRON(R)-III
P/S fluid capacity reference value
: About 0.85 liters (1.8/1.5 US/Imp.pt)