System Specifications
Tightening Torque SpecificationsCAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
NOTE:
The specified tightening torque is described in the following.
Air Cleaner Components
Cylinder Head Cover Components
Camshaft and Tappet Components
Engine Mountings Components
Timing Chain Cover Components
Timing Chain and Chain Tensioner Components
Valve and Cylinder Head Components
Piston, Piston Ring and Connecting Rod Component
Main Bearing, Crankshaft and Cylinder Block Components
Reference:
For the tightening torque of fastener not specified in this section, refer to Fasteners Information.
Oil pump 25 Nm (2.5 kg-m, 18.5 lbf-ft)
Water pump bolt 25 Nm (2.5 kg-m, 18.5 lbf-ft)
Exhaust manifold
Bolt (a) 50 Nm (5.1 kg-m, 37.0 lbf-ft)
Nut (b) 50 Nm (5.1 kg-m, 37.0 lbf-ft)
