Courtesy Lamp: Service and Repair

Interior Room Lamp: Removal and Installation

Front Room/Map Lamp Assembly

Removal

The front room/map lamp assembly is replaced as part of the overhead console assembly. Refer to [Headlining: Removal and Installation] Service and Repair.





: Vehicle front

: Metal clip

Installation

Installation is in the reverse order of removal.

Bulb or Lens Replacement

1) Using a suitable tool (A), remove the front room/map lamp RH and/or LH lenses (1) as necessary.





: Vehicle front

: Pawl

CAUTION:
Wrap a cloth around suitable tool to protect components from damage.

2) Release one side of the bulb (2) from the tab using a suitable tool, then pull straight downward to remove.






Vanity Mirror Lamp

Removal

The vanity mirror lamp is replaced as part of the sunvisor assembly. Refer to [Headlining: Removal and Installation] Service and Repair.





Installation

Installation is in the reverse order of removal.

Bulb Replacement

The vanity mirror lamp bulb is replaced as part of the sunvisor assembly. Refer to [Headlining: Removal and Installation] Service and Repair.

Glove Box Lamp

Removal

1) Remove instrument lower panel (RH) and lower glove box assembly. Refer to [Instrument Lower Panel RH and Glove Box: Removal and Installation] Instrument Lower Panel RH and Glove Box.
2) Rotate glove box lamp socket (3) with bulb (1) counterclockwise, then pull away from lamp shield (2) on steering member to remove.





: Vehicle front

Installation

Installation is in the reverse order of removal.

Bulb Replacement

3) Remove the glove box lamp. Follow the GLOVE BOX LAMP REMOVAL AND INSTALLATION procedure in this section.
4) Pull bulb (2) straight out from glove box lamp socket (1) to remove.











Room Lamp

Removal

1) Using a suitable tool (A), release the pawls and remove the room lamp lens (1).





: Pawl

CAUTION:
Wrap a cloth around suitable tool to protect components from damage.

2) Remove room lamp screws (2).
3) Disconnect the connector, then remove room lamp.

Installation

Installation is in the reverse order of removal.

Bulb or Lens Replacement

4) Using a suitable tool, release the pawls and remove the room lamp lens.
5) Release the room lamp bulb retainers (1), then pull bulb (2) straight out to remove.