Windshield Washer Motor: Service and Repair

Washer Motor: Removal and Installation

Removal and Installation

Removal

1) Remove RH front fender protector. Refer to [Front Fender Protector: Removal and Installation] Front Fender Protector Removal and Installation.
2) Disconnect the washer hoses.
3) Disconnect the washer motor connector.
4) Slide retaining ring upward to release washer motor.





5) Remove washer motor from washer fluid reservoir.

Installation

Installation is in the reverse order of removal.

CAUTION:

When installing front and rear washer motor, there should be no packing twists, etc.