Dissemble

1. Remove valve lifters and shims.

NOTE: Arrange the valve lifters and shims in correct order.

2. Remove valves.





(a) Using Special Service Tool (SST) Valve Spring Compressor # 09202 - 70020 (Attachment # 09202 - 00010), compress the valve spring and remove the 2 keepers.
(b) Remove the spring retainer, valve spring and valve.





(c) Using needle-nose pliers, remove the oil seal.





(d) Using compressed air and a magnetic finger, remove the spring seat by blowing air.

NOTE: Arrange the valves, valve springs, spring seats and spring retainers in correct order.





3. Remove following parts:
(a) Engine Coolant Temperature (ECT) sender gauge.
(b) ECT cut switch.
(c) ECT sensor.
(d) Thermal Vacuum Valve (TVV).