Fluid Drain & Refill

Check fluid condition.
If the fluid smells burnt or is black, replace it as follows.
a. Remove the drain plug and drain the fluid.
b. Reinstall the drain plug securely.





c. With the engine OFF, add new fluid through the oil filler pipe.
Fluid Type: ATF D-II or Dexron-III (Dexron II)
Capacity:
Dry Fill: 11.0 liters (11.6 US Qts, 9.7 Imp. qts)
Drain and Refill: 1.9 liters (2.0 US Qts, 1.7 Imp. qts)
d. Start the engine and shift the shift lever into all positions from the P to L position and then shift into the P-position.
e. With the engine idling, check the fluid level. Add fluid up to the cool level on the dipstick.
f. Check the fluid level with the normal operating temperature 70-80°C (158-176°F) and add as necessary.

NOTICE: Do not overfill.