Technical Specification

DIMENSIONS
Companion Flange Runout
Radial And Lateral (max.) 0.10 mm (0.0039 inch)

Front Drive Pinion Adjusting Plate Washer Thickness
(1.) 1.70 mm (0.0669 inch)
(2.) 1.73 mm (0.0681 inch)
(3.) 1.76 mm (0.0693 inch)
(4.) 1.79 mm (0.0705 inch)
(5.) 1.82 mm (0.0717 inch)
(6.) 1.85 mm (0.0728 inch)
(7.) 1.88 mm (0.0740 inch)
(8.) 1.91 mm (0.0752 inch)
(9.) 1.94 mm (0.0764 inch)
(10.) 1.97 mm (0.0766 inch)
(11.) 2.00 mm (0.0787 inch)
(12.) 2.03 mm (0.0799 inch)
(13.) 2.06 mm (0.0811 inch)
(14.) 2.09 mm (0.0823 inch)
(15.) 2.12 mm (0.0835 inch)
(16.) 2.15 mm (0.0846 inch)
(17.) 2.18 mm (0.0858 inch)
(18.) 2.21 mm (0.0870 inch)
(19.) 2.24 mm (0.0882 inch)
(20.) 2.27 mm (0.0894 inch)
(21.) 2.30 mm (0.0906 inch)
(22.) 2.33 mm (0.0917 inch)

Oil Seal Drive Depth
Service Limit 1.0 mm (0.039 inch)

Pinion Gear To Side Gear Backlash
Service Limit 0.05-0.20 mm (0.0020-0.0079 inch)

Pinion To Ring Gear Backlash
Service Limit 0.13-0.18 mm (0.0051-0.0071 inch)

Ring Gear Runout
Maximum 0.10 mm (0.0039 inch)

Side Gear Thrust Washer Thickness
Without Differential Lock:
(1.) 1.6 mm (0.063 inch)
(2.) 1.7 mm (0.067 inch)
(3.) 1.8 mm ().071 inch)
With Differential Lock:
(1.) 0.9 mm (0.035 inch)
(2.) 1.0 mm (0.039 inch)
(3.) 1.1 mm (0.043 inch)
(4.) 1.2 mm (0.047 inch)

Total Pinion Preload
Service Limit 0.4-0.6 Nm (3.5-5.2 inch lbs.)

GENERAL SPECIFICATIONS
Drive Pinion Bearing Preload
New Bearing 0.9-1.6 Nm (8.7-13.9 inch lbs.)
Reused Bearing 0.5-0.8 Nm (4.3-6.9 inch lbs.)