Power Steering Pump

SERVICE SPECIFICATIONS
Oil Clearance Between Pump Shaft And Front Housing Bushing:
Standard 0.03-0.05 mm (0.0012-0.0020 inch)
Maximum 0.07 mm (0.0028 inch)
Vane Plate:
Height:
Minimum 8.6 mm (0.339 inch)
Thickness:
Minimum 1.397 mm (0.0550 inch)
Length:
Minimum 14.991 mm (0.5902 inch)
Vane Plate And Pump Rotor Groove Clearance:
Maximum 0.035 mm (0.0014 inch)
Vane Plate Length:
Pump Rotor And Cam Ring Mark:
None 14.999-15.001 mm (0.59051-0.59059 inch)
1 14.997-14.999 mm (0.59043-0.59051 inch)
2 14.995-14.997 mm (0.59035-0.59043 inch)
3 14.993-14.995 mm (0.59027-0.59035 inch)
4 14.991-14.993 mm (0.59020-0.59027 inch)
Flow Control Valve Spring Length:
Minimum 32.3 mm (1.307 inch)
Pump Rotating Torque:
Maximum 0.25 Nm (2.2 inch lbs.) Or Less

TORQUE SPECIFICATIONS
Union Bolt To:
Pressure Feed Tube 47 Nm (34 ft. lbs.)
Pressure Port Union To:
Pump Housing 83 Nm (61 ft. lbs.)
Rear Housing Set Bolt 24 Nm (17 ft. lbs.)
Oil Reservoir Set Bolt:
Front 13 Nm (108 inch lbs.)
Rear 24 Nm (17 ft. lbs.)
Vane Pump Pulley Set Nut 43 Nm (32 ft. lbs.)
Vane Pump Assembly Set Bolt 39 Nm (29 ft. lbs.)