With Tilt Steering Column

SERVICE SPECIFICATIONS
Pawl Stopper:
1 Or A 12.68-12.74 mm (0.4992-0.5016 inch)
2 Or B 12.61-12.67 mm (0.4965-0.4988 inch)
3 Or C 12.54-12.60 mm (0.4937-0.4961 inch)
4 Or D 12.47-12.53 mm (0.4909-0.4933 inch)
5 Or E 12.40-12.46 mm (0.4882-0.4906 inch)
6 Or F 12.33-12.39 mm (0.4854-0.4878 inch)
7 Or G 12.26-12.32 mm (0.4827-0.4850 inch)

TORQUE SPECIFICATIONS
Steering Column Assembly Set Bolt And Nut 25 Nm (19 ft. lbs.)
Control Shaft Lever To Control Shaft Assembly:
Automatic Transmission 35 Nm (26 ft. lbs.)
Intermediate Shaft To:
Control Valve Assembly 35 Nm (26 ft. lbs.)
Sliding w/Shaft York Sub-Assembly To:
Intermediate Shaft 35 Nm (26 ft. lbs.)
Main Shaft Assembly To:
Sliding w/Shaft York Sub-Assembly 35 Nm (26 ft. lbs.)
Main Shaft Assembly To:
Sliding York Sub-Assembly 35 Nm (26 ft. lbs.)
Turn Signal Bracket Set Bolt 7.8 Nm (69 inch lbs.)
Tilt Lever Assembly Set Bolt 2 Nm (17 inch lbs.)
Tilt Sub Lever Side Pawl Set Bolt To Nut 5.9 Nm (52 inch lbs.)
Tilt Lever Retainer Set Nut 15 Nm (11 ft. lbs.)
Compression Spring Set Bolt 7.8 Nm (69 inch lbs.)