Rear Seat (Bench Type)
REMOVALHINT: A bolt without a torque specification is shown in the standard bolt chart.
REMOVE REAR SEAT
a. Release the rear seat lock and swing up the seat cushions.
b. Remove the 4 bolts.
c. Pull up the rear seat and remove it.
INSTALLATION
INSTALL REAR SEAT
a. Hook the rear seat to the body panel.
b. Install the 4 bolts.
Torque: 19 N.m (195 kgf.cm, 14 ft.lbf)
c. Release the rear seat lock and swing down the seat cushions.
HINT: Before swinging down the seat cushion, store the inner belts in the rear seat.