Canada - Exhaust System - Tailpipe Clamp Installation Angle
Bulletin
TSB2217
Issue Date
2005-03-16
Market
Canada
Title
EXHAUST TAILPIPE JOINT CLAMP INSTALLATION
Component
GENERAL INFORMATION
Models
All Applicable Models
INTRODUCTION:
The purpose of this bulletin is to provide additional details regarding the proper installation angle of an exhaust tailpipe joint clamp on applicable Toyota vehicles.
APPLICABLE VEHICLES:
- 2003 - 2005 model year Corolla vehicles.
- 2000 - 2005 model year Echo vehicles.
- 2003 - 2005 model year Matrix vehicles.
- 2001 - 2003 model year Prius vehicles.
- 2004 - 2005 model year Sequoia vehicles.
- 2003 - 2005 model year Tundra vehicles.
WARRANTY INFORMATION:
INSTALLATION PROCEDURE:
All Models:
Install exhaust tailpipe assembly.
1. Install a new gasket into the exhaust center pipe.
2. Install the new clamp positioning the bolt within the "acceptable range" shown in the corresponding illustrations.
NOTE:
Do not reuse the removed gasket and clamp.
2003 - 2005 Corolla:
Torque: 32 N-m (326 kgf-cm, 24 ft-lbf)
2000 - 2005 ECHO:
Torque: 32 N-m (326 kgf-cm, 24 ft-lbf)
2003 - 2005 Matrix:
Torque: 32 N-m (326 kgf-cm, 24 ft-lbf)
2001 - 2003 Prius:
Torque: 32 N-m (326 kgf-cm, 24 ft-lbf)
2004 - 2005 Sequoia:
Torque: 32 N-m (326 kgf-cm, 24 ft-lbf)
2003 - 2005 Tundra:
Torque: 32 N-m (326 kgf-cm, 24 ft-lbf)