Windows: Description and Operation

System Outline

- The power window system is controlled by the body ECU. This system has following features.

1. Manual Up and Down Function
This function causes the window to open or close while the power window switch is being pulled halfway up or pushed halfway down. The window stops as soon as the switch is released.

2. Front Doors One-Touch Auto Up and Down Function
The front doors one-touch auto up and down function enables the window of front doors to be fully opened or closed at a touch of the power window switch.

3. Jam Protection Function
A jam protection function automatically stops the power window and moves it downward if a foreign object gets jammed in the window during one-touch auto-up operation.

4. Remote Control Function
The up and down operations of the front passenger door window and the rear door windows can be controlled by operating the power window master switch.

5. Ker-Off Operation Function
Within about 45 seconds when turn OFF the ignition SW or open and shut the driver's seat door, this function enables the door window operation with the power window master switch and/or the manual operation at each passenger's seat door. (The driver's seat door includes the one-touch auto up and down operation as well)

6. Key-Linked Up and Down Function
A key-linked up and down function, which is linked to the driver door key cylinder operation, open or close the window of the all doors.

- When the battery terminal or fuse is disconnected, the glass position of all doors have to be reset to the initial positions, door by door, by the power window control switch in accordance with the following procedure:
A. Reconnect the battery terminal or fuse.
B. Turn ON the ignition switch.
C. Lower the window of each door by the power window switch to open it halfway or more.
D. Then move the window up by the power window switch to close it fully. Do not release the switch for at least one second after the window is fully closed.

7. Back Window Control
When the ignition SW is off, the ignition key is not inserted into the ignition key cylinder, the back window can be opened by pressing the back window open SW of the transmitter for approximately 0.8 seconds. At that time, the wireless door lock buzzer beeps once.