B2793

ENGINE IMMOBILISER: ENGINE IMMOBILISER SYSTEM: B2793: Transponder Chip Malfunction

DTC B2793 - Transponder Chip Malfunction

DESCRIPTION

This DTC is output when a malfunction is found in the key during key code registration or a key code is not registered normally. Replace the key if the key code registration is not performed normally and this DTC is detected.






INSPECTION PROCEDURE
NOTE: If the key is replaced, register the key.

PROCEDURE

1. RE-REGISTER KEY
(a) Delete the DTCs Reading and Clearing Diagnostic Trouble Codes.
(b) Re-register the key Programming and Relearning.
NEXT -- Continue to next step.
2. CHECK ENGINE START
(a) Check that the engine starts.
OK:
The engine starts.
NG -- REPLACE KEY
OK -- END