Disassembly

SEAT: REAR SEAT ASSEMBLY (for RH Side): DISASSEMBLY

DISASSEMBLY
CAUTION: Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.





1. REMOVE REAR SEAT CUSHION HINGE SUB-ASSEMBLY
HINT: Use the same procedure for both sides.

(a) Remove the bolt.
(b) Disengage the hook and remove the rear seat cushion hinge.
2. REMOVE REAR SEAT CUSHION UNDER COVER





(a) Remove the rear seat cushion stopper from the rear seat cushion cover band and the slit of the rear seat cushion under cover.
(b) Using a clip remover, remove the 7 clips and the rear seat cushion under cover.
3. REMOVE REAR SEAT CUSHION STOPPER





(a) Remove the screw and the rear seat cushion stopper.
4. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY





(a) Disengage the hook and remove the rear seat cushion frame.
5. REMOVE REAR SEAT CUSHION COVER





(a) Remove the 10 hog rings and the rear seat cushion cover.
6. REMOVE REAR SEAT HEADREST ASSEMBLY





(a) Push the lock button of the rear seat headrest support and remove the rear seat headrest.
7. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY





(a) Push the lock button of the rear seat headrest support and remove the rear seat headrest.
8. REMOVE REAR SEAT SHOULDER BELT COVER





(a) Disengage the 4 claws and remove the rear seat shoulder belt cover.
9. REMOVE REAR SEATBACK LOCK COVER





(a) Remove the screw.
(b) Disengage the claw and remove the rear seatback lock cover.
10. REMOVE TETHER ANCHOR COVER




HINT: Use the same procedure for both sides.

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and open the cover.





(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the tether anchor cover.
11. REMOVE REAR SEAT HEADREST SUPPORT





(a) Remove the 17 hog rings.





(b) Disengage the 2 claws and remove the rear seat headrest support.
HINT: Use the same procedure to remove all the rear seat headrest supports.

12. REMOVE REAR SEATBACK LOCK RELEASE BUTTON





(a) Remove the rear seatback lock release button.
13. REMOVE REAR SEATBACK STOP BUTTON GROMMET





(a) Disengage the 2 claws and remove the rear seatback stop button grommet.
14. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY





(a) Remove the belt of the rear center seat outer belt from the rear seatback cover band.





(b) Remove the rear seatback frame.
15. REMOVE REAR SEATBACK LOCK ASSEMBLY





(a) Remove the 2 bolts and the rear seatback lock.
16. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY Removal
17. REMOVE REAR SEATBACK COVER





(a) Pass the hook of the rear seatback cover through the slit in the rear seatback pad.
(b) Remove the 8 hog rings and the rear seatback cover.