Removal

1GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE Service Precautions
2. DRAIN ENGINE COOLANT Service and Repair
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
4. REMOVE V-BANK COVER Removal
5. REMOVE AIR CLEANER ASSEMBLY Removal
6. REMOVE THROTTLE BODY BRACKET Removal
7. REMOVE OIL BAFFLE PLATE Removal
8. REMOVE NO. 1 SURGE TANK STAY Removal
9. REMOVE NO. 2 SURGE TANK STAY Removal
10. REMOVE INTAKE AIR SURGE TANK Removal
11. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY Removal





12. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
(a) Disconnect the connector.
(b) Using a 19 mm deep socket wrench, remove the water temperature sensor and gasket.