Installation

LIGHTING: REAR ROOM LIGHT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL REAR ROOM LIGHT ASSEMBLY
(a) Install room light bulb No. 1.





(b) Engage the 4 claws and install the room light switch base.
(c) Install the roof wire into the claw of the room light.





(d) Engage the 4 claws and install the room light.





(e) Engage the 4 claws and install the 2 covers.





(f) Engage the 4 claws and install the room light lens.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)