DTC 80-43
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: 58-43: SPD Signal Error
DTC 58-43 - SPD Signal Error
DTC 80-43 - SPD Signal Error
DESCRIPTION
INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
PROCEDURE
1. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)
(a) Enter the "Navigation Check" mode (Vehicle Sensors) Navigation Check Mode.
(b) While driving the vehicle, compare the "SPD" indicator to the reading on the speedometer. Check if these readings are almost equal.
OK:
The readings are almost equal.
NG -- GO TO "SPEED SIGNAL DOES NOT CHANGE IN THE NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE
OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY