Rear View Monitor System
PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING
HOW TO PROCEED WITH TROUBLESHOOTING
HINT: Use these procedures to troubleshoot the rear view monitor system.
1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS
NEXT -- Continue to next step.
3. CHECK DTC OF NAVIGATION SYSTEM
(a) Refer to DTC Check/Clear procedures of the navigation system Navigation System.
Result
B -- GO TO NAVIGATION SYSTEM
A -- Continue to next step.
4. PROBLEM SYMPTOM CONFIRMATION
Result
B -- Go to step 6
A -- Continue to next step.
5. SYMPTOM SIMULATION
NEXT -- Continue to next step.
6. CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM
(a) Refer to Navigation System Problem Symptoms Table.
Result
B -- FOLLOW THE NAVIGATION SYMPTOM CHART TO PERFORM TROUBLESHOOTING
A -- Continue to next step.
7. PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table Rear View Monitor System.
Result
B -- Go to step 9
A -- Continue to next step.
8. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW
(a) Terminals of ECU Rear View Monitor System.
NEXT -- Continue to next step.
9. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
10. CONFIRMATION TEST
NEXT -- END