Vehicle Position Mark Is Not Updated

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Vehicle Position Mark is not Updated

Vehicle Position Mark is not Updated

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MAP DISC





(a) Check that the map disc is not deformed or cracked.
OK:
No deformations or cracks on map disc.

NG -- REPLACE MAP DISC
OK -- Continue to next step.

2. CHECK MAP DISPLAY
(a) Check if a touch scroll can be performed on the map display.
OK:
Touch scroll can be performed.

NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- Continue to next step.

3. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)





(a) Enter the "Navigation Check" mode (Vehicle Sensors) Navigation Check Mode.
(b) While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal.
OK:
The readings are almost equal.

NG -- GO TO "SPEED SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE