Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: YAW RATE AND DECELERATION SENSOR: REMOVAL

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
4. REMOVE REAR CONSOLE BOX POCKET Removal
5. REMOVE CONSOLE BOX CARPET Removal
6. REMOVE REAR CONSOLE BOX ASSEMBLY Removal
7. REMOVE YAW RATE SENSOR
(a) Remove the 2 nuts (labeled A) and sensor.
(b) Disconnect the sensor connector (labeled B), and then detach the clamp (labeled C) from the sensor bracket.