Removal

3UR-FE EMISSION CONTROL: AIR INJECTION DRIVER: REMOVAL

REMOVAL

1. REMOVE AIR INJECTION CONTROL DRIVER ASSEMBLY





(a) Disconnect the 4 air injection control driver connectors.





(b) Remove the bolt and disconnect the ground cable.
(c) Disconnect the 2 wire harness clamps.





(d) Remove the 3 bolts and air injection control driver.
2. REMOVE AIR INJECTION CONTROL DRIVER (for Bank 1)





(a) Remove the 2 bolts.





(b) Remove the 2 screws and air injection control driver.





3. REMOVE AIR INJECTION CONTROL DRIVER (for Bank 2)
(a) Remove the 2 screws and air injection control driver.