Reassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD (for Floor Shift Type): REASSEMBLY

REASSEMBLY
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation
2. INSTALL NO. 2 INSTRUMENT PANEL WIRE
(a) Attach the wire to the clamps to install the wire to the instrument panel.





3. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Installation
4. INSTALL ACCESSORY METER ASSEMBLY





(a) Install the accessory meter with the 3 screws.
(b) Connect the accessory meter connector.
5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY





(a) Install the register with the 3 screws.
6. INSTALL DEFROSTER NOZZLE ASSEMBLY





(a) Install the nozzle with the 3 screws.
7. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT





(a) Attach the claw to install the duct.
(b) Install the 2 screws.
8. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY





(a) Install the register with the 3 screws.
9. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT





(a) Attach the claw to install the duct.
(b) Install the 2 screws.
10. INSTALL NO. 1 HEATER TO REGISTER DUCT WITH NO. 2 HEATER TO REGISTER DUCT
(a) Install the duct with the 5 screws.





11. INSTALL NO. 1 INSTRUMENT PANEL PIN
(a) Install the 2 pins with the 2 screws.





12. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (for Automatic Air Conditioning System)





(a) Attach the 2 claws to install the sensor.
(b) Connect the sensor connector.